This is a working overview of Spray drying, written for readers who want more than a one-paragraph summary but less than a textbook.
Reviewed 2026-05-22. Anything still debated is marked as such rather than presented as settled.
Industrial production begins with whey protein concentrate or isolate dispersed in water. Selected proteases, such as trypsin, pepsin, or microbial enzymes, are added under controlled pH and temperature. Hydrolysis continues until a target hydrolysis level is reached, after which heat or pH adjustment inactivates the enzyme. Ultrafiltration, diafiltration, and ion exchange may remove larger peptides, salts, or residual lactose. The liquid is then concentrated and spray-dried into powder. Processing choices influence peptide size, bitterness, mineral content, and microbial quality.
Analytical control focuses on protein content, hydrolysis extent, molecular weight distribution, and residual intact protein. Kjeldahl or Dumas methods measure total nitrogen, while size-exclusion chromatography or mass spectrometry estimates peptide profiles. Sodium dodecyl sulfate polyacrylamide gel electrophoresis can show remaining intact proteins, though small peptides may not resolve. Enzyme-linked immunosorbent assays are used to assess residual allergenic proteins in some contexts. Because no single method captures all relevant features, manufacturers combine several assays and report values against internal specifications.
Laboratories characterize whey protein hydrolysate by several complementary methods. Total nitrogen or Kjeldahl analysis estimates crude protein, while amino acid analysis gives a more detailed composition. Size-exclusion chromatography and mass spectrometry separate peptides by molecular weight and can reveal the distribution of chain lengths. Degree of hydrolysis is often calculated from free amino groups using trinitrobenzenesulfonic acid or o-phthaldialdehyde assays. No single measurement captures all relevant properties, so specifications usually combine protein content, peptide profile, moisture, ash, and microbial limits.
Storage stability depends on moisture, temperature, oxygen, and packaging. Dry hydrolysate powders are typically stable for months to years when kept cool and sealed, but they can absorb water and cake if exposed to humid air. Higher temperatures accelerate Maillard reactions between peptides and residual sugars, leading to browning and flavor changes. Lipid oxidation can occur if residual fat is present, producing off-odors. Once a powder is reconstituted, microbial growth becomes a concern, so liquid forms require refrigeration or other preservation steps.
Quality control for hydrolysates often includes allergen and contaminant checks. Because whey is a milk-derived ingredient, milk protein residues may remain, and the extent to which hydrolysis reduces allergenic potential is product-specific and not fully predictable. Tests may screen for heavy metals, melamine, pesticides, and microbial indicators. Enzyme residues and processing aids are also monitored when regulations require it. Batch-to-batch consistency is assessed through peptide mapping or functional tests, since small process changes can alter taste, solubility, or nutritional performance.
| Property | Value | Notes |
|---|---|---|
| Moisture content | ≤ 6% for powder | Lower moisture supports shelf stability |
| Water activity | Often below 0.3 | Higher values increase caking and browning |
| Typical storage temperature | 15–25 °C | Cool, dry, protected from humidity |
| Common analytical method | Size-exclusion chromatography | Estimates peptide molecular weight distribution |
| Bulk density | 0.3–0.6 g/mL | Depends on spray-drying and particle size |
Advanced peptide profiling uses liquid chromatography coupled with mass spectrometry to identify fragments and assess batch consistency. Amino acid analysis after acid hydrolysis quantifies the building blocks and can reveal deviations from expected composition. Residual enzyme activity may be monitored in products where active enzymes are undesirable. Allergen tests often use immunoassays for beta-lactoglobulin, but hydrolysis can reduce or alter epitope recognition, so negative results do not prove absence of allergenic potential. Physical tests include particle size, bulk density, and reconstitution behavior.
Regulatory and labeling frameworks vary by country. In the United States, whey protein hydrolysate may be regulated as a food ingredient or a dietary supplement ingredient depending on intended use. In the European Union, it falls under general food law, with additional rules for infant formula and foods for special medical purposes. A claim of hypoallergenicity is not established by hydrolysis alone and generally requires clinical evidence. Open questions remain about how degree of hydrolysis relates to bitterness, nitrogen absorption, and residual allergenicity across different products and processing methods.
Quality control includes verifying identity, protein content, degree of hydrolysis, and absence of contaminants. Because hydrolysates are often used in foods and supplements, regulations may treat them as food ingredients rather than drugs. Allergen labeling rules can vary, and highly hydrolyzed products are sometimes considered less allergenic, but this depends on peptide size and clinical testing. Sourcing documents should link each lot to raw whey, enzymes, and processing conditions. Independent verification is useful because analytical results can shift with method and laboratory.
Laboratories characterize whey protein hydrolysate using several complementary methods. Nitrogen determination estimates total protein, while size-exclusion chromatography and mass spectrometry reveal peptide size distributions. Degree of hydrolysis can be calculated from free amino groups, pH change, or osmolarity, but each approach has assumptions. Moisture, ash, and mineral content are also measured because they affect shelf life and reconstitution. No single test fully describes a hydrolysate, so specifications usually combine several results.
Storage stability depends on moisture, temperature, and exposure to oxygen. Dry hydrolysate powders are hygroscopic and can clump or cake when humidity is high. Moisture also promotes Maillard reactions between peptides and residual lactose, leading to browning and flavor changes. Cool, dry, sealed storage slows these reactions, while prolonged warmth can increase off-flavors and reduce solubility. Stability studies often track color, moisture, free amino groups, and microbial load over time to estimate shelf life.
Quality control checks identity, composition, and contaminants. Moisture, ash, fat, and carbohydrate are measured by standard methods, and microbiological limits are set for total counts, coliforms, and specific pathogens. Heavy metals and pesticide residues may be monitored depending on market requirements. Adulteration with intact whey protein or individual amino acids is possible, so peptide fingerprints and free amino acid profiles can help verify authenticity. Regulatory frameworks vary: some countries treat hydrolyzed whey as a conventional dairy ingredient, while infant formula uses face additional compositional rules. Which marker peptides best confirm source and processing remains an open analytical question.
Storage stability depends on moisture, temperature, and packaging. Dry powders with low water activity resist microbial growth, but they can still absorb water, develop off-colors through Maillard reactions, or oxidize residual lipids. Sealed containers kept in a cool, dry place are standard. Stability studies typically monitor moisture, solubility, color, peptide size, and microbial counts over months. Established practice favors low humidity and moderate temperatures. How brief excursions above recommended conditions affect peptide profiles and sensory qualities is less predictable and may depend on the specific product matrix.
Regulatory status differs by country and intended use. In many jurisdictions, whey protein hydrolysate is regulated as a food ingredient, while specific infant formula or medical food uses may require additional review. Labeling rules govern protein content claims, allergen statements, and terms such as partially hydrolyzed or extensively hydrolyzed. Analytical methods for degree of hydrolysis are not fully standardized, so values can depend on the assay. This variability makes direct comparison between products difficult unless the method and reference material are stated.
Quality control for whey protein hydrolysate begins with specification of protein, moisture, ash, fat, lactose, and degree of hydrolysis, while molecular weight distribution is measured by size-exclusion chromatography or electrophoresis. Free amino acid content can be quantified by amino acid analysis. Microbial limits, heavy metals, and residual enzyme activity are also monitored. Because hydrolysis conditions influence batch consistency, manufacturers validate processes and test each lot against release criteria. Sampling plans and reference standards help compare results across laboratories.
Across several benchmarks, AlphaFold3 has demonstrated, on average, superior performance to conventional search-based docking algorithms in predicting small-molecule–protein binding modes. AlphaFold 3 version can predict structures of protein complexes with a very limited set of selected cofactors and co- and post-translational modifications. Between 50% and 70% of the structures of the human proteome are incomplete without covalently-attached glycans. Studies have shown that although AlphaFold3 can jointly model protein–ligand co-folding, its accuracy drops markedly on test cases with low similarity to its training data—an area of particular importance for drug discovery. Other work has found that AlphaFold is insensitive to adversarial decoys generated by altering the physicochemical properties of binding pockets, suggesting potential reliance on training-set memorization rather than genuine chemical awareness.
The structures of human P-TEFb containing Cdk9 and cyclin T1 and the HIV Tat•P-TEFb complex have been solved using X-ray crystallography. The first structure solved demonstrated that the two subunits were arranged as has been found in other cyclin dependent kinases. Three amino acid substitutions were inadvertently introduced in the subunits used for the original structure and a subsequent structure determination using the correct sequences demonstrated the same overall structure except for a few significant changes around the active site. The structure of HIV Tat bound to P-TEFb demonstrated that the viral protein forms extensive contacts with the cyclin T1 subunit (Figure 2).
Motilin has 22 amino acids and molecular weight of 2698 daltons. In extract from human gut and plasma, there are two basic forms of motilin. The first molecular form is the polypeptide of 22 amino acids. The second form, on the other hand, is larger and contains the same 22 amino acids as the first form but includes an additional carboxyl-terminus end. The sequences of amino acids of motilin is: Phe-Val-Pro-Ile-Phe-Thr-Tyr-Gly-Glu-Leu-Gln-Arg-Met-Gln-Glu-Lys-Glu-Arg-Asn-Lys-Gly-Gln. The structure and dynamics of the gastrointestinal peptide hormone motilin have been studied in the presence of isotropic q = 0.5 phospholipid bicelles. The NMR solution structure of the peptide in acidic bicelle solution was determined from 203 NOE-derived distance constraints and six backbone torsion angle constraints. Dynamic properties for the 13Cα→1H vector in Leu-10 were determined for motilin specifically labeled with 13C at this position by analysis of multiple-field relaxation data. The structure reveals an ordered alpha-helical conformation between Glu-9 and Lys-20. The N-terminus is also well structured with a turn resembling that of a classical beta-turn. The 13C dynamics clearly show that motilin tumbles slowly in solution, with a correlation time characteristic of a large object.
Sources: en.wikipedia.org
Afucosylated antibodies are intensely used in the field of advanced medicine, also due to their high ADCC (antibody-dependent cellular cytotoxicity). This makes them effective in binding to specific targets while minimizing damage to surrounding tissue. Some of the fields in which afucosylated antibodies are used or considered for application are: cancer immunotherapy autoimmune diseases Infectious diseases Furthermore, afucosylated antibodies are used as diagnostic tools and play a role in the development of personalized medications.
Several artificial nucleobases have been synthesized, and successfully incorporated in the eight-base DNA analogue named Hachimoji DNA. Dubbed S, B, P, and Z, these artificial bases are capable of bonding with each other in a predictable way (S–B and P–Z), maintain the double helix structure of DNA, and be transcribed to RNA. Their existence could be seen as an indication that there is nothing special about the four natural nucleobases that evolved on Earth. On the other hand, DNA is tightly related to RNA which does not only act as a transcript of DNA but also performs as molecular machines many tasks in cells. For this purpose it has to fold into a structure. It has been shown that to allow to create all possible structures at least four bases are required for the corresponding RNA, while a higher number is also possible but this would be against the natural principle of least effort.
In March 2003, Cambridge Antibody Technology (CAT) stated its wish to "initiate discussions regarding the applicability of the royalty offset provisions for Humira" with Abbott Laboratories in the High Court of London. In November 2004, the trial began, and in December 2004, Justice Hugh Laddie ruled for CAT. A short version of the full statement of the proceedings was released. In it Justice Laddie remarked, "Abbott was in error when it made its first royalty payment to CAT calculated on the basis that only 2% of the Net Sales was due. It should have calculated on the basis of the full royalty of just over 5% and should have paid and continued to pay CAT accordingly." Justice Laddie went on to observe "...that the construction advanced by Abbott does violence to the language of the agreements, renders them obscure and makes little or no commercial sense. For this reason CAT wins the action." Abbott was required to pay CAT US$255 million, some of which was to be passed to its partners in development. Of this sum, the Medical Research Council received US$191 million, and in addition, Abbott was asked to pay the MRC a further US$7.5 million over five years from 2006, providing that Humira remains on the market. The MRC also is to receive a further £5.1 million (sterling) in respect of past royalties.
In May 1952, Raymond Gosling, a graduate student working under the supervision of Rosalind Franklin, took an X-ray diffraction image, labeled as "Photo 51", at high hydration levels of DNA. This photo was given to Watson and Crick by Maurice Wilkins and was critical to their obtaining the correct structure of DNA. Franklin told Crick and Watson that the backbones had to be on the outside. Before then, Linus Pauling, and Watson and Crick, had erroneous models with the chains inside and the bases pointing outwards. Franklin's identification of the space group for DNA crystals proved her correct. In February 1953, Linus Pauling and Robert Corey proposed a model for nucleic acids containing three intertwined chains, with the phosphates near the axis, and the bases on the outside. Watson and Crick completed their model, which is now accepted as the first correct model of the double helix of DNA. On 28 February 1953 Crick interrupted patrons' lunchtime at The Eagle pub in Cambridge, England to announce that he and Watson had "discovered the secret of life".
Sources: en.wikipedia.org
Hydrolysis extent is often estimated by measuring the increase in soluble nitrogen or free amino groups relative to total nitrogen. The o-phthaldialdehyde method and trinitrobenzenesulfonic acid assay are common laboratory approaches. Values are method-dependent, so comparisons require the same assay and calculation.
Enzymatic cleavage can expose hydrophobic amino acid residues that interact with bitter taste receptors. The intensity depends on peptide sequence, hydrolysis extent, and further processing such as filtration or deamidation. Bitterness is not a reliable indicator of protein quality or allergenicity.
Moisture uptake, storage temperature, and packaging barrier properties are major factors. Residual lactose can participate in browning reactions when water activity and temperature rise. Shelf-life testing usually combines accelerated and real-time conditions to estimate change in color, solubility, and microbial stability.
Degree of hydrolysis is commonly estimated by quantifying free amino groups with colorimetric assays such as o-phthaldialdehyde or trinitrobenzenesulfonic acid. The result is expressed as a percentage of total peptide bonds cleaved. Because different assays can give different values, method details matter when comparing products.